Re: SHC Connection issues

Dave Schwartz

Looking at all the PCBs, you probably could implement these with discrete resistors and that has been described several times over the years. You would start with the smallest (1/8w?) resistors you could find, mount them vertically in pins 2 through n and connect all the top leads together with a piece of 'L'-shaped wire going down into pin1. The pre-made part is just more convenient although it is a fair bit more expensive.

On 2020-06-30 7:52 a.m., Martin Bonfiore wrote:
If there is enough real estate you might consider laying out board for either resistor array or discretes.   There used to be dip resistor arrays that may be reversible...may not still exist in today's high density smd world.

Join to automatically receive all group messages.