Re: OnStep Configuration Generator lives on ...


simpsonj@...
 

I'm not sure if it's operator error (likely) or a bug, but when I attempt to verify release 3.16 using the config.h file generated, I get the following error:

 Arduino: 1.8.5 (Windows 10), Board: "Generic STM32F103C series, STM32F103C8 (20k RAM. 64k Flash), STM32duino bootloader, 72Mhz (Normal), Smallest (default)"

Build options changed, rebuilding all
In file included from D:\Arduino\OnStep\OnStep.ino:55:0:

Validate.h:264: error: #error "Configuration: AXIS1_MICROSTEPS must be defined in your Config.xxx.h file if using AXIS1_DRIVER_MODEL!"

     #error "Configuration: AXIS1_MICROSTEPS must be defined in your Config.xxx.h file if using AXIS1_DRIVER_MODEL!"

      ^

Validate.h:322: error: #error "Configuration: AXIS1_MICROSTEPS; TMC2130 invalid micro-step mode, use: 256,128,64,32,16,8,4,2,or 1"

       #error "Configuration: AXIS1_MICROSTEPS; TMC2130 invalid micro-step mode, use: 256,128,64,32,16,8,4,2,or 1"

        ^

Validate.h:343: error: #error "AXIS2_MICROSTEPS must be defined in your Config.xxx.h file if using AXIS2_DRIVER_MODEL!"

     #error "AXIS2_MICROSTEPS must be defined in your Config.xxx.h file if using AXIS2_DRIVER_MODEL!"

      ^

Validate.h:398: error: #error "Configuration: AXIS2_MICROSTEPS; TMC2130 invalid micro-step mode, use: 256,128,64,32,16,8,4,2,or 1"

       #error "Configuration: AXIS2_MICROSTEPS; TMC2130 invalid micro-step mode, use: 256,128,64,32,16,8,4,2,or 1"

        ^

Multiple libraries were found for "Wire.h"
 Used: D:\Arduino\hardware\Arduino_STM32\STM32F1\libraries\Wire
 Not used: D:\Arduino\hardware\Arduino_STM32\STM32F1\libraries\WireSlave
exit status 1
#error "Configuration: AXIS1_MICROSTEPS must be defined in your Config.xxx.h file if using AXIS1_DRIVER_MODEL!"

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.


I can't find an entry for "AXIS1_MICROSTEPS" or "AXIS2_MICROSTEPS" in the config.h file.  Am I missing something?

Thanks in advance.

Jim Simpson

Join main@onstep.groups.io to automatically receive all group messages.