Re: Maximum Microstep Rate | 3D Printed Planetary Gear based Mounts
For starters, use Stepperonline's precision planetary (PLE series). You buy the planetary and the motor separately. It will run you $65-70 for the pair (vs$59 for above). The precision planetary has much better backlash specs and is a heftier design. You also have the benefit of selecting different, higher torque motors (e.g. Oriental motors).
With that said, you are still looking at 20arcmin of backlash for the 100:1 planetary. Since your design has no further reduction, that translates directly to the telescope pointing and guiding capability. The images provided on Roman Hujer's website are widefield, so keep your expectations realistic.
Regarding micro-stepping, high torque makes the individual micro-steps not equal, meaning it is not a linear function between full steps, but this has not hindered most applications.
As you can see from above, at 64 micro-steps, you get about 0.51arcsec resolution per micro-step. I don't think you need more than that for this level of precision. If you use different micro-steps for guide and slew, you can keep the resolution for guiding and still get decent slew rates. 256 micro-steps will still be below the recommended 62K maximum (~@28K).
My 10:1 PLE series planetary.