Since I aquired an Losmandy G11 mount without any goto provision I decided to create my own solution. I was a bit reluctant to use a Gemini, mainly because of the cost, but also due to the reliability since the servo motors are somewhat prone to failure. I also like to have complete control over the software/firmware so that no "show stopper" issues will ever be a problem for me. Looking around the 'net I saw other goto systems that seemed capable, but either they had needlessly complex hardware or were commercial systems that cost about twice what they should.
OnStep is a computerized goto system, usually for stepper motor equipped mounts though any step/dir interface motor driver (including servo) should work. It was designed, from the beginning, as a more or less general purpose system and provisions were made in the firmware to allow for use on a variety of mounts including Equatorial and Alt/Az (GEM, Fork, Dobsonian, etc.) It uses an LX200 like computer command set with a few extensions to suit hand controller-less operation.
There's a telescope hand controller App for Android (free in the Google Play Store,) an option to control through a website (Smart Web Server,) and a dedicated physical hand controller (Smart Hand Controller.) Or, on a PC there's ASCOM and INDI drivers for control. These options allow you to setup and control OnStep using a wide range of software including my Sky Planetarium, Cartes du Ciel, Stellarium, SkySafari, KStars, PHD2, etc. You can see most of the control possibilities in the diagram below:
If you find OnStep useful and would like to show your appreciation consider donating code to the project (if capable,) or perhaps a language translation, or new celestial object catalog for the SHC, or a small monetary donation which can be put toward covering my expenses associated with this project.