Hi guys, the last year i manage to build my onstep on a exos nano eq3, it is working wooooonderfull for AP, but now i decided to change the mount to something bigger EQ5 (and be able to add a bigger g

#wemos #S6 #EQ3 #fysetc #wifi

It does work as VQuiet in my other setup

#eq2 #fysetc #S6

https://youtube.com/shorts/deP04bh6eoU?feature=share Hi Guys see the video on the link, that's a cg3 mount with a issue, it dosnt move if I add weigth (even if it is balanced) The onstep system that i

#eq2 #fysetc #S6

FYI this is my nigth sky, i can move freely rigth or left from north but if i cross it that's where i get stuck

#fysetc #S6

Is a 130/500mm tube mi horizon limit is -30, and upwards 90

#fysetc #S6

Ok more info, it works with stellarium the unusual behaviour happens when i move from east to west wich is a usual thing for me to do since im in Bogota Colombia at 4° 35'56' and that's almost my hori

#fysetc #S6

Hi guys, I built a S6 onstep with 200 steps motors on a EQ3, and here is my problem, every time when i slew, it successfully moves to the target, but it doesnt finish the slew, it remains blocked like

#fysetc #S6

Hi guys, im trying o use a 28BYJ-498 motor to be used as focuser in a FYSETC S& with a TMC2130, I already did the unipolar to bipolar conversion (took of red cable and cut the line), but now im not su

#S6

Hi guys, Im building an ostep with a S6, DEC and RA are working with 400 steps motors and a couple of TMC2130 drivers, now i want to add a focuser and since i have an unused 28BYJ-48 motor (see video

#fysetc #S6

Awesome answer, and well explained ill try it and let you know Btw im not sure about what are you saying about the driver, but im working with x2 tmc2130 and I config the micro steps in the onstep fir

#EQ3 #S6

Nope i tried it with this config as you suggested The dec axis is doing full 360 rotations to move to jupiter

#EQ3 #S6

Mmm now im confused Dec: 200 step 1.7A motor with 20 teeth pulley + belt + 80 teeth pulley (no internal wheels in the mount) RA: 200 step 1.7A motor to the slow motion cable 136 teeth wheel (the orang

#EQ3 #S6

Hi guys, This is my second onstep bulid this time im trying to build it for a celstron 130eq, i had to do a lot of work on that mount to make it work, finally it is moving, buuuutt not as i expected R

#EQ3 #S6

Ok totally my fault, the motor was moving too slow, that i cant percive the movement, i adjusted the config, and now everithing works ok

#fysetc #S6

Maybe a pic will help, this is the place where im plugging the tmc2130 and the motor cables

#fysetc #S6

Hi guys, A few months ago i was able to build an onstep system thanks to your help, thanks again you are awesome Now im trying to add a focuser with a TMC2130 and a 1.8° (200 steps) nema 11 motor 0.67

#fysetc #S6

Nvm i was able to make it work the cables were bad from factory, that was the issue

#fysetc #S6

12v fan direct to the others pins works, but im unable to make the 5v fan work with the features, this is on my config i tried both fan0pin and fan1pin, switch and analog, but nothing happens #define

#fysetc #S6

Hi Guys, Im trying to use onstep with the stellarium+ app as this guy does in this video https://youtu.be/OqXqYb8Df78 But im. Unable to do so, can anyone guide me? This is what I get when trying to co

Nope im not sure im doing this well, it is something like this? BTW this is the fan: https://a.aliexpress.com/_mNxWnzr #define FEATURE_LIST_DS ON #define FEATURE1_NAME "FAN1" #define FEATURE1_PURPOSE

#fysetc #S6