I would take Nina out of the picture and help reduce debugging by using Howard's Sky Planetarium software to do the same actions? Then if those fail we can get better error messages then ones translat

#error

There is no free serial port to be C on the OnStep Bluebill. IIRC serial 1 or USB use requires a bootloader that uses too much of the scare on board memory. Thus the MCU is programmed through a free s

#bluepill #error #wemos

I'm still designing the ratio. But max would be about 64,000. That's with the 512cpr encoder. The 256cpr would only be half.

#error

I would make sure you have the libraries you need. https://onstep.groups.io/g/main/wiki/3915

#arduino #esp32 #error #EQ5 #configuration

Thank you, Hitoshi, for your kind remarks. I am using OnStepX with river 1.0.23 (or 1.0.23. 1.0.24 is not working for me). A4988 chip has nEN, but all Stepstick ha EN. Correct me if I am wrong. Now my

#ascom #error

Matteo, On my CG5/EQ5, when the polar axis is "open" (that is, you can see through the polar scope), my scope can face 90 deg east or west. After polar aligning, HOME is when the scope faces towards P

#error #EQ5

These parameters that are missing from your Config.h are present in the latest 4.24 release branch's default Config.h file. Are you trying to upgrade from an older version to the latest but reusing yo

#arduino #error

ESP32-Duino + Hujer shield, flash does not work. attach the necessary information. What might be the problem? Thanks for all the help, sorry translator.

#error #miniesp3

Also you can't enable tone and status LED simultaneously.

#EQ5 #error #wemos #esp32

Hello, I#m trying to compile OnStepX for Fysetc S6 2.0 to enable the THERMISTOR feature and always get the following compilation error. /../OnStepX/src/telescope/mount/site/Site.cpp: In function 'void

#fysetc #error #S6

I don't think so, the day counter is independent of the actual date etc and just increments at midnight from 1 through 7 and back to 1. I think it is counting 1 to 7 correctly but the case checking ar

#error #bluepill

multioskar28@... 11:24am #35206 FYI, I ordered a second WEMOS from Amazon when I had trouble with the device connecting to my wifi (my issues and mistakes). The board did not work, so I returned it. S

#error #wmosd1 #wemosd1minipro #maxesp3

I don't know about Alt-Az mounts, but OnStep's default is that the overhead limit is 80 degrees. When OnStep hits that limit, movement will stop. Check what your overhead limit is, from the Android Ap

#fysetc #error

also sorry for my bad english, I use a translation program when writing

#superpolaris #arduinonano #define #wiki-notice #error

If your timezone is +8 (i.e. your local time is 8 hours ahead of UTC) then your UTC offset is -8. UTC offset is same value but opposite sign of your timezone offset.

#error

problem： The manual guide star of PhD can not control the movement of onstep direction, or the movement distance is almost ignored Detailed description In the process of using PhD for calibration, the

#error

Exactly. And all other (non TMC) step stick drivers I know of don't factor in the RMS current (*0.71) with their Vref formulas, so I adopted the convention here that TMC drivers use Vref = Imax for co

#error

The lack of enough pins on certain boards forces compromises: you can have one feature or the other, but not both. In this case, LED_STATUS2 and BUZZER use the pin designated by Aux8. You can't have a

#error #backlash