Very nice Vroobel. I added it. Let me know what motors, gear reductions and OnStep board you used? Chad

#mount #mks

I re-read that you have the MKS v1.0 board, but I checked and microstep jumper setting is the same for v1.0 and v2.0/2.1. One more thing, what is your Vref set at for the TMC2208?

#EQ5 #mks #tmc2208 #tmc2103

The wiki says the DRV8825 is not the best choice. You can adjust the microstepping values using jumpers on the M0/M1/M2 pins underneath the drivers. Your v1.4 board has a different PinMap than the v2.

#mks #eq3-2 #drv8825

I have had my CG5/EQ5 converted to Onstep for some time now, but the horrible Texas heat and mosquitoes (along with too much summer clouds) prevented me from fully testing the Goto and tracking. With

#EQ5 #tmc2209 #mks

Hi thank you very much for those configs. I had Serial C to OFF. So once I chnaged it to 9600 wifi modul started to work nicely also on MKS. You saved me :) Once again - thanks! R

#wmosd1 #mks

Otto, Thanks for sharing. Your conversion is in the showcase now. Yes, we need a table somewhere on what specific x driver goes with y board, as it is not obvious. In the meantime, users can either lo

#EQ5 #mks #tmc2209 #wemos

You can use a hub but it's not usually required with this new driver set.

#mks

As Howard said, OnStep cannot use the UART interface. You can still use the TMC2209, but you are limited to microstepping of: 64,32,16,or 8. Not a real limitation though, since it covers the range we

#mks #tmc2209 #fysetc #uart

The time mismatch problem solved. The CDC didn't use actual system time, which was enabled through CDC. Now I am waiting for the clear sky for field testing. RTC DS3234 also added through SPI, Thanks

#mks #wemos #EQ5 #cdc