Read this: https://github.com/espressif/arduino-esp32/issues/2422

#sws #maxesp3 #onstepx

OK, now I found the answer. Turns out that checking the [X] for ACCESSPOINT and dont check [ ]STATION mode. Guess what? It doesnt switch to Station mode. Thanks Howard.

#esp32 #sws

Good news to report! Replacement ESP32 received, programmed (largely as recommended). After a day of troubleshooting and tuning, the OnstepX EM200 is behaving well! I won't claim that all issues are r

#maxesp3 #tmc5160 #sws #onstepx

Yeah I wasn't expecting it to be changed. I know that sort of inherited problem all too well. i was just sharing my pain. Thanks Howard.

#esp32 #sws

Hi Michael Glad it's resolved. Enjoy your onstep! Hitoshi

#configuration #maxesp3 #onstepx #sws #wifi

On Thu, Jan 5, 2023 at 01:28 PM, Douglas Cook wrote: Re changing SWS server AP mode IP settings, i guess it should be as follows? Just use the same settings that you have for the STATION.

#ascom #sws #wifi

On Thu, Jan 5, 2023 at 03:15 AM, Wally wrote: The stalling/loss of position goes away if i limit slewing to 4 deg/sec. at 8 deg/sec it becomes erratic. Trying to reach > about 6 deg/s with stepper mot

#esp32 #sws #maxesp4

The file name first char is supposed to be upper case. Should be fixed now.

#tmc2209 #sws

I wouldn't call it better than having a real SWS though.

#sws

Hello Everybody, Has anyone got this specific combination to work? FYSETCs6 v2.0 (pre 2021) running Onstep 4.24; Smartwebserver with Teensy 3.2 + W5500 ? I am ignoring the encoders for the moment. If

#fysetc #sws

Hello Chad, Thanks for your response, it is much appreciated. My apologies for a delayed reply: my tasks as carer for my severely disabled wife take up a lot of time. On the topic of blinking lights,

#sws

When i have used Teensy and W5500 i have not seen a blinking light on Teensy. It still works. Can you connect via ethernet? I have seen blinking light on ESP8266 for when i use Wifi with OnStep.

#sws

Yes, never forget to read carefully all the instructions!!

#sws #onstepx

The libraries are very very specific. Please follow this wiki page. the "most" is a little concerning in your message. Also i remember a member a few months back trying 2.0 RC and i dont remember thei

#arduino #sws

YAY! :) It is a nice software package that continues to really improve and add features. Now do think about putting the Indi server on a raspberry pi computer. Leave the pi computer on your telescope,

#wifi #cnc #sws

I won't disagree with you. But to me assigning IP addresses is not a DHCP server (semantics I know). But apparently that is in common usage, so I will correct myself. The SWS assigns 192.168.0.124 and

#bluepill #sws

Good! Now it works, at least with a web page. But via Ascom, I can't connect.

#sws #wemos #bcg

That is a good question. But those 3 rates (sidereal, lunar and solar) are not the only rates out there. There is refraction rate (an improvement over the King rate), and full compensated rate (compen

#sws