Hi guys, i report an issue with the serial usb connection and SHC. It seems to be in conflict with USB serial. In fact if i connect first the USB and THEN the SHC, it works well. If i insert SHC and T

Howard this is a fantastic present for us !! Thank you very much !!

Some news: i upgraded to last master version, and the issue disappeared. Good....

Hi guys, i have a strange issue with wemos r32 anc CNC3. No movement on axis 1. I mean not only motor , just on the planetarium, cartes du ciel or skysafari, i press the axis 2 button and yes, i see t

ah, it's a MAX esp 3 with RTC and bme280. I suspect the issue is on the RTC , but i don't understand why and what...

Hi guys, suddenly i have this error on the app and also wifi server: NV initialize/EEPROM bar The wifi server also reports "error code 15" The system seems to work , but reports this error. The bme al

Hi guys, i have some issues with maxesp3 and bme280. I have the I2C version , with SDA & SCL. Flashed correctly. I connected the BME to the I2C of the DS3231, but when i connect to the wifi server. it

Hi guys i have a MKS gen L2, and i have this issue with SHC. In fact when i plug USB to PC , SHC stops to work. After 20 sec it come back to work , but position and all is resetted. Is there a way to

No it doesn't work. The message is different: "port closed" instead "Onstep not found"

Small update: the esp32s now works with serial ports. I changed the baud rate in the Onstep sketch and put the same on the serial port. Instead, the Wemos R32 still does not works.... I will try with

I tried all the hints: updating the ch340 drivers does not help. I tried to change port , properties ( different baud, parity, ecc ) and nothing happens... The BT connections, otherwise, throghout the

No one has some suggestions? Hints?

i tried some things. When i flash the wemos, the operations in arduino IDE ends with the phrase "hard resetting via RTS pin" if i don't touch anything , i can connect via USB to CdC If i pull out the

...and if it was a windows problem with the serial ports, then i could not flash the wemos. But i flashed it without any problem.

i don't know, i tried an other PC with windows 8 ( mine is 10 ) and it's the same. I reinstalled also the separate driver for CH340 , with no result...

Same problem with MaxESP3 and esp32. Usb connection is not recognized by ascom drivers. I have latetst version of both ( Onstep 3.16 , and ASCOM Onstep latest drivers )

Hi guys i have a problem connecting Onstep to PC using the micro USB cable of the wemos r32. In fact i can connect via wifi using the esp8266, i can connect by bluetooth , but if i use the com port in

Now i tried to download again and flash without touching anything. It connects after a long time ( about 2 minutes after blue light flashing...stop flashing for a while, continue flashing...and so on

Yes. I tried each version 2.42 2.52 2.62 but same result: the blue light flashes, stop a while e continue flashing. I have an other esp 8266 and it makes the continuos blu light after 2 seconds withou

Hi guys, i have a problem with the esp8266 flashing procedure. It seems ok but when i turn on the wifi, it does not connect. There isn't any "ONSTEP" server, i tried to flash again erasing all bt noth