You can use the Teensy/W5500 Ethernet module, see : main@onstep.groups.io | Wiki

Hi Andrea, First, for the BlueTooth, you can change the SERIAL_C_BLUETOOTH_NAME in the config.h file, and for the WiFi, in the network page of the sws you can change the station and/or the access poin

Hi Bill, Read the second question in this page: main@onstep.groups.io | Wiki

Very nice job!

#SHC

VID: 10C4 ---> Vendor id : Silicon Labs PID: EA60 ---> Product id : CP210x USB to UART Bridge

You can try the blank scketch you have when you open the ArduinoIDE, i make that to blank a module.

Hi Mark and Marc, I have 3 of this D2 Mini Pro clone from china that have the same problem. I try many tricks i found on the WEB but nothing that work. If someone found a solution, please post it here

Hello Drew, I don't have any option to upload a file in the file section. I reload all the file in Thingiverse Alain.

Hi Jeff, I design the MiniESP3 and in this link you found the 3D printed case for that: OnStep MiniESP32 Box by kinlougha - Thingiverse You can see my CG3-2 and CG5 conversion at this link : Albums de

You can also use this one : 2/5PCS DC 12-24V to 5V 3A Adjustable Step Down Power Module Buck Mini Converter | eBay Alain.

Tom, Check for the continuity between the LED cathode and the pin 9 (GPIO25) of the ESP32 and check if you have 3v3 at the anode of the LED. Also, check if the R3 is good. Alain.

Hi Tom, Does the R3 (3k3), under the board, is in place and LED_STATUS is ON in the config.h Alain.

Pete, You can send the LX200, or any else command via WIFI to Onstep to park your mount Alain.

Prasad, You can use somethings like this : 2 NEW Neutrik NE8FDV EtherCon Connector Vertical PCB RJ45 Cat 5 Panel Mount Jack | eBay Alain.

Hello guys, You must seethis artiche on guiding Alt-Az with PHD2 Guiding the Panther Alt-Az mount with PHD2 - Telescope Mounts Explained

Hello Jeff, See that page : main@onstep.groups.io | Wiki Alain.

Thanks Khalid.

Thanks Howard for the fast answer. I can live with that :-) Cheers.

Hello Howard and friends, First of all great thanks to Howard, Khalid and all the others contributors for your great job. I like to know if i can easily reallocate a pin from config file, like #undef.

He Chad Take a look at another fine product from Howard : hjd1964/OnFocus: Arduino UNO/Mega328 based stepper motor focuser control (github.com) Alain