I will test them to see how they go

Hi everybody how are you. These Stepsticks are good for something? Has anyone tried them on the TMC2130?

If you bought it on aliexpress make sure the gear thread is well done. It happened to me once that the screw was not tightened because the gear thread was not well made.

#backlash #EQ5

I have the same pulley ratio installed on a NEQ5. NEQ5 NEMA17. My mount has 144 teeth and a 400 step motor. I can tell you that the relationship is correct. From my experience I was able to recommend

#backlash #EQ5

Thank you very much, I never imagined that.

Hi. I am trying to make auto meridian flip work in Sequence Generator Pro, but when moving the telescope error appears. When I move it with the software controls it works and with the Android app from

https://uk.rs-online.com/web/p/electronics-varnishes-lacquers/8232640/

A picture is worth a thousand words Thank you

It's teensy 3.2 sorry. These are the settings without changing anything. The debug option is activated after several times trying to load the firmware of esp8266 with all flash mode settings and not s

Hello I have updated the firmware of teensy 3.1 and esp8266, since I had the first versions of 2017, to my Onstep Min 1.25. and DRV8825 I did it through teens and putting the command: hF #: ESPFLASH #

Roughly it can be a problem of the connection of the motor coils. Make sure they are correctly connected and that the driver current is correct.

Good morning to everybody In line with this topic I would like to know if this line is enabled #define ST4_HAND_CONTROL_ON and instead of using manual cotrol I connect the camera to the st4 port, does

Hi. Khalid Baheyeldin do you know any homemade focuser that works with ASCOM?

It can be done.

The assembly that you use is the same as me although I use pulley of 60/16 teeth and the motors are nema 17 to 32 micro steps Drv8825 I use Ph2guiding and I got an RMS error of 0.25-1.1 sec according

Hola, he logrado conectar stellarium a través de WiFi a Onstep usando Stellariumscope. Lo comparto en caso de que alguien esté interesado. http://welshdragoncomputing.ca/x/index.php/home/stellariumsco

It is a library for Linux. It only works on the following platforms:

Well yesterday I did the first tests. The weather was bad, quite windy with gusts of up to 45km/h, but I could not wait any longer. The truth is not what I expected, it is much better. With a mediocre

La carpeta es un ejemplo. Lo puedes poner cuando quieras pero la carpeta se tiene que llamar igual que el sketch==> Onstep

#define Ramps14_OFF // <- enciende _ON para usar esta configuración Creo que es esto si no que el procesador de mega 2560 este selecionado en Mega2560 y no el 1280 en Arduino Tambien todos los archivo