On Fri, Dec 2, 2022 at 11:31 AM, Drew 🔭📷🚴‍♂️ wrote: Since you did not post both Config.h files that may be where the problem is. Sorry, ambiguous request. I meant please post the Config.h from OnStep

#tmc5160 #maxesp3

This brings up the question of how you are starting OnStepX. In OnStepX the first GoTo will start the motors. Since you did not post both Config.h files that may be where the problem is. That is, enab

#tmc5160 #maxesp3

On Fri, Dec 2, 2022 at 10:46 AM, Mike Ahner wrote: I'm not sure where you're located, but if you want to buy a 12t pulley, here are 3 sources. Sourcing a manufactured unit is preferred with such a sma

On Fri, Dec 2, 2022 at 10:41 AM, Adam Jaskula wrote: What do you use to switch liblaries? rename folder? run multiple vm? You switch versions in the Arduino IDE "Boards Manager", search on ESP32 and y

#tmc5160 #maxesp3

What version of ESP32 firmware are you using? I suspect that the NV may be the issue. With V2.0.5 (latest) firmware it has a "erase flash" option you can use when uploading OnStepX. You will need to r

#tmc5160 #maxesp3

On Thu, Dec 1, 2022 at 06:53 AM, Howard Dutton wrote: This is appealing as 2.0.5, I believe, will be the best choice for the SHC and SWS as well. I am using v2.0.5 in OnStepX, SHC and SWS without issu

On Tue, Nov 29, 2022 at 04:06 PM, Howard Dutton wrote: The power connector, the fuse holder, the 2-pin molex power switch connector, and 3.5mm stereo mini are the only through-hole components selected

Also, since I use "Aircraft DIN" style connectors, I would prefer it not to have the driver connectors installed.

On Tue, Nov 29, 2022 at 03:37 PM, Howard Dutton wrote: the SWS is designed to handle up to 8 "external" GPIO pins controlled by OnStepX. Exactly.

How about adding a header for the available I/O pins on the #2 ESP32? There is room next to it, would be forward looking. I am sure there are others (such as myself) who would be willing to take a few

On Tue, Nov 29, 2022 at 11:45 AM, Howard Dutton wrote: Seems pretty complicated to me and it seems like "feature creep" too, so... not going there. OK, that's why I as these questions. I look forward

On Tue, Nov 29, 2022 at 11:24 AM, Howard Dutton wrote: Makings of a software nightmare. How do you mean? The wireless SHC commands are already ported through it. Are you referring to the ST4 port itse

How about moving the ST4 to the second ESP32? Seems as though this would help the pinmap.

On Tue, Nov 29, 2022 at 10:10 AM, Howard Dutton wrote: it's so much cheaper than the EasyEDA alternative, not using that (DS3231MZ+) I agree, this chip was also part of the SMT issue, making its use q

On Tue, Nov 29, 2022 at 09:16 AM, Howard Dutton wrote: a second micro-usb for it so you can flash the SWS from the front panel Wouldn't flash thru Serial_B be the way to go, like the ESP8266?

On Thu, Nov 24, 2022 at 12:04 PM, Howard Dutton wrote: Cursor went missing in SP In SkySafari the cursor "hangs" and the debug output disappears. Then at the end of the slew debug outputs and the cros

On Thu, Nov 24, 2022 at 12:22 PM, alucky wrote: I recently saw some TERRANS Industry branded Goto kits on Aliexpress, which have the name ONSTEP in them. I think we are seeing the beginning of the OnS

On Thu, Nov 24, 2022 at 11:15 AM, Howard Dutton wrote: 32us didn't crash, but responsiveness suffered. OK, I'll test further. I didn't notice that, even with my full setup. Bluetooth, debug, etc.

On Wed, Nov 23, 2022 at 08:51 AM, Howard Dutton wrote: I added step rate limits to the ESP32 HAL in OnStepX so it detects the ESP32 library version and if > 2.0.0 keeps step rates >= 40us; How did you

Did you try the usual hardware troubleshooting? Try switching motors, then drivers and see if the behavior changes.

#EQ5 #esp32 #maxesp3