#onstepx #sws #sws #onstepx


Debalme Stephane
 

Yes, never forget to read carefully all the instructions!!


Chad Gray
 

I did the same thing a few months ago and Howard showed me the comment also.  

Chad 

On Thu, Sep 29, 2022, 5:19 PM Debalme Stephane <debalme.stephane@...> wrote:

Hi Chad,
You're right, I didn't mention it because I didn't do it.
I did it and it works....
thanks for your help.

stéphane


Debalme Stephane
 

Hi Chad,
You're right, I didn't mention it because I didn't do it.
I did it and it works....
thanks for your help.

stéphane


Chad Gray
 

You did not mention using the NV Wipe.  Read the comment in the extended.config.h.  :)

image.png


On Wed, Sep 28, 2022 at 4:21 PM Debalme Stephane <debalme.stephane@...> wrote:
Hi everybody
My Onstep : Maxpcb3.6 + teensy4.1 and run it with OnstepX.
I m using the ethernet addon (w5500 and teensy 3.2).
Everything works fine but I need to change the IP adress from 192.168.1.55 to 192.168.1.173
I changed the IP adress in the extended config.h from SWS but the IP still be 192.168.1.55 even after many atempt to flash the teensy.
I tried to change directly from the SWS, but it didn't work as well.
Any idea?
thanks
stéphane


Debalme Stephane
 

Hi everybody
My Onstep : Maxpcb3.6 + teensy4.1 and run it with OnstepX.
I m using the ethernet addon (w5500 and teensy 3.2).
Everything works fine but I need to change the IP adress from 192.168.1.55 to 192.168.1.173
I changed the IP adress in the extended config.h from SWS but the IP still be 192.168.1.55 even after many atempt to flash the teensy.
I tried to change directly from the SWS, but it didn't work as well.
Any idea?
thanks
stéphane