Topics

guiding issue with PHD2 after meridian flip

Niko Kivel
 

Hi guys

I replaced the controller of my EQ6-R with a BluePill based onStep. Not that I needed a new controller, more as a test rig for a potential DIY mount.

I encounter a problem after the meridian flip, or in general when imaging on different pier sides.
I always have to re-calibrate PHD2 when switching sides, which is annoying. I couldn't find anything by using the search function, nor did I find anything in the Config.h that points into the right direction.

Maybe it's a feature :) Just let me know.
FYI I'm on branch release-3.16. Config is below.

BTW, I like the controller quite a lot, even though it takes a little getting used to. I also have other remarks, but I first want to get traction and be able to image a whole night before asking morw detailed questions.

best
Niko

// ---------------------------------------------------------------------------------------------------------------------------------
// Configuration for OnStep

/*
 *          For more information on setting OnStep up see http://www.stellarjourney.com/index.php?r=site/equipment_onstep
 *                      and join the OnStep Groups.io at https://groups.io/g/onstep
 *
 *           *** Read the compiler warnings and errors, they are there to help guard against invalid configurations ***
*/

// ---------------------------------------------------------------------------------------------------------------------------------
// ADJUST THE FOLLOWING TO CONFIGURE YOUR CONTROLLER FEATURES ----------------------------------------------------------------------
// <-Req'd = always must set, <-Often = usually must set, Option = optional, Adjust = adjust as req'd, Infreq = infrequently changed

// PINMAP --------------------------------------------------------------------------------------------------------------------------
//   *** See the matching Pins.xxx.h file for your setup (found by looking in src/pinmaps/Models.h) with detailed information ***
//   *** to be sure it matches your wiring.            *** USE AT YOUR OWN RISK ***                                           ***

//      Parameter Name              Value   Default  Notes                                                                      Hint
#define PINMAP                  STM32Blue //    OFF, Choose from: MiniPCB, MiniPCB2, MaxPCB, MaxPCB2, STM32Blue,             <-Req'd
                                          //         Ramps14, MaxESP2, MaxESP3.  Check Constants.h for more info.

// SERIAL PORTS --------------------------------------------------------------------------------------------------------------------
#define SERIAL_A_BAUD_DEFAULT        9600 //   9600, n. Where n=9600,19200,57600,115200 (common baud rates.)                  Infreq
#define SERIAL_B_BAUD_DEFAULT      115200 //   9600, n. See (src/HAL/) for your MCU Serial port # etc.                        Option
#define SERIAL_B_ESP_FLASHING         OFF //    OFF, ON Upload ESP8266 WiFi firmware through SERIAL_B with :ESPFLASH# cmd.    Option
#define SERIAL_C_BAUD_DEFAULT         OFF //    OFF, n, ON for ESP32 Bluetooth.                                               Option
#define SERIAL_C_BLUETOOTH_NAME  "OnStep" // "On..", Bluetooth device name for ESP32.                                         Option

// MOUNT TYPE --------------------------------------------------------------------------------------------------------------
#define MOUNT_TYPE                    GEM //    GEM, GEM for German Equatorial, FORK for Equatorial Fork, or ALTAZM          <-Req'd
                                          //         Dobsonian etc. mounts. GEM Eq mounts perform meridian flips.

// USER FEEDBACK -----------------------------------------------------------------------------------------------------------
#define LED_STATUS                     ON //     ON, Blinks w/sidereal tracking otherwise steady on indicates activity.       Option
#define LED_STATUS2                   OFF //    OFF, ON Blinks 1s interval w/PPS sync, steady for gotos, off if in standby.   Option
#define LED_RETICLE                   128 //    OFF, n. Where n=0..255 (0..100%) activates feature sets default brightness.   Option
#define BUZZER                        OFF //    OFF, ON, n. Where n=100..6000 (Hz freq.) for piezo speaker. ON for buzzer.    Option
#define BUZZER_STATE_DEFAULT          OFF //    OFF, ON Start with piezo buzzer/speaker enabled.                              Option


// TIME AND LOCATION -------------------------------------------------------------------------------------------------------
#define TIME_LOCATION_SOURCE       DS3231 //    OFF, DS3231 (I2c,) DS3234 (Spi,) TEENSY (T3.2 internal,) or GPS source.       Option
                                          //         Provides Date/Time, and if available, PPS & Lat/Long also.

// SENSORS -----------------------------------------------------------------------------------------------------------------
// * = also supports ON_PULLUP or ON_PULLDOWN to activate MCU internal resistors if present.
#define WEATHER               BME280_0x76 //    OFF, BME280 (I2C 0x77,) BME280_0x76, BME280_SPI (see pinmap for CS.)          Option
                                          //         Provides temperature, pressure, humidity.

#define TELESCOPE_TEMPERATURE         OFF //    OFF, DS1820 for telescope temperature on one wire interface.                  Option

#define HOME_SENSE                    OFF //    OFF, ON*. Automatically detect and use home switches. For GEM mode only.      Option
#define HOME_SENSE_STATE_AXIS1       HIGH //   HIGH, State when clockwise of home position, as seen from front. Rev. w/LOW.   Adjust
#define HOME_SENSE_STATE_AXIS2       HIGH //   HIGH, State when clockwise of home position, as seen from above. Rev. w/LOW.   Adjust
                                          //         Signal state reverses when travel moves ccw past the home position.

#define LIMIT_SENSE                   OFF //    OFF, ON* limit sense switch close to Gnd stops gotos and/or tracking.         Option
#define LIMIT_SENSE_STATE             LOW //    LOW, For NO (normally open) switches, HIGH for NC (normally closed.)          Adjust
#define PEC_SENSE                     OFF //    OFF, ON*, n, sense digital OR n=0 to 1023 (0 to 3.3 VDC) analog threshold.    Option
#define PEC_SENSE_STATE              HIGH //   HIGH, Senses the PEC signal rising edge or use LOW for falling edge.           Adjust
                                          //         Ignored in ALTAZM mode.

#define PPS_SENSE                     OFF //    OFF, ON* enables PPS (pulse per second,) senses signal rising edge.           Option
                                          //         Better tracking accuracy especially for Mega2560's w/ceramic resonator.

// ST4 INTERFACE -----------------------------------------------------------------------------------------------------------
// *** It is up to you to verify the interface meets the electrical specifications of any connected device, use at your own risk ***
#define ST4_INTERFACE                 OFF //    OFF, ON, ON_PULLUP enables interface. <= 1X guides unless hand control mode.  Option
                                          //         During goto btn press: aborts slew or continue meridian flip pause home
#define ST4_HAND_CONTROL              OFF //    OFF, ON for hand controller special features and SHC support.                 Option
                                          //         Hold [E]+[W] btns >2s: Guide rate   [E]-  [W]+  [N] trk on/off [S] sync
                                          //         Hold [N]+[S] btns >2s: Usr cat item [E]-  [W]+  [N] goto [S] snd on/off
#define ST4_HAND_CONTROL_FOCUSER      OFF //    OFF, ON alternate to above: Focuser move [E]f1 [W]f2 [N]-     [S]+            Option

// GUIDING BEHAVIOUR -------------------------------------------------------------------------------------------------------
#define GUIDE_TIME_LIMIT                0 //      0, No guide time limit. Or n. Where n=1..120 second time limit guard.       Adjust
#define GUIDE_DISABLE_BACKLASH        OFF //    OFF, Disable backlash takeup during guiding at <= 1X                          Option

// TRACKING BEHAVIOUR ------------------------------------------------------------------------------------------------------
#define TRACK_AUTOSTART               OFF //    OFF, ON Start with tracking enabled.                                          Option
#define TRACK_REFRACTION_RATE_DEFAULT  ON //    OFF, ON Start w/atmospheric refract. compensation (RA axis/Eq mounts only.)   Option
#define TRACK_BACKLASH_RATE            25 //     25, n. Where n=2..100 (x sidereal rate) during backlash takeup.              Option
                                          //         Too fast motors stall/gears slam or too slow and sluggish in backlash.

// SYNCING BEHAVIOUR -------------------------------------------------------------------------------------------------------
#define SYNC_CURRENT_PIER_SIDE_ONLY    ON //     ON, Disables ability of sync to change pier side, for GEM mounts.            Option

// SLEWING BEHAVIOUR -------------------------------------------------------------------------------------------------------
#define SLEW_RATE_BASE_DESIRED        2.0 //    1.0, n. Desired slew rate in deg/sec. Adjustable at run-time from            <-Req'd
                                          //         1/2 to 2x this rate, and as MCU performace considerations require.
#define SLEW_RATE_MEMORY               ON //    OFF, ON Remembers rates set across power cycles.                              Option
#define SLEW_ACCELERATION_DIST        5.0 //    5.0, n, (degrees.) Approx. distance for acceleration (and deceleration.)      Adjust
#define SLEW_RAPID_STOP_DIST          2.0 //    2.0, n, (degrees.) Approx. distance required to stop when a slew              Adjust
                                          //         is aborted or a limit is exceeded.
#define MFLIP_SKIP_HOME                ON //    OFF, ON Goto directly to the destination without visiting home position.      Option
#define MFLIP_PAUSE_HOME_MEMORY       OFF //    OFF, ON Remember meridian flip pause at home setting across power cycles.     Option
#define MFLIP_AUTOMATIC_MEMORY        OFF //    OFF, ON Remember automatic meridian flip setting across power cycles.         Option

// PARKING BEHAVIOUR -------------------------------------------------------------------------------------------------------
#define STRICT_PARKING                OFF //    OFF, ON Un-parking is only allowed if successfully parked.                    Option

// MOTION CONTROL ----------------------------------------------------------------------------------------------------------
#define STEP_WAVE_FORM             SQUARE // SQUARE, PULSE Step signal wave form faster rates. SQUARE best signal integrity.  Adjust

// Stepper driver models (also see ~/OnStep/sd_drivers/Models.h for additional infrequently used models and more info.):
// A4988, DRV8825, LV8729, S109, SSS TMC2209*, TMC2130* **, and TMC5160* ***
// * = add _QUIET (stealthChop tracking) or _VQUIET (stealthChop tracking & slew,) for example "TMC2130_VQUIET"
// ** = SSS TMC2130 if you choose to set stepper driver current (in mA) set Vref pot. 2.5V instead of by motor current as usual.
// *** = SSS TMC5160 you must set stepper driver current (in mA) w/ #define AXISn_TMC_IRUN (IHOLD, etc.)

// AXIS1 RA/AZM --------------------------
#define AXIS1_STEPS_PER_DEGREE    25600.0 //  12800, n. Number of steps per degree:                                          <-Req'd
                                          //         n = (stepper_steps * micro_steps * overall_gear_reduction)/360.0
#define AXIS1_STEPS_PER_WORMROT     51200 //  12800, n. Number of steps per worm rotation (PEC Eq mode only:)                <-Req'd
                                          //         n = (AXIS1_STEPS_PER_DEGREE*360)/reduction_final_stage

#define AXIS1_DRIVER_MODEL TMC5160_VQUIET //    OFF, (See above.) Stepper driver model.                                      <-Often
#define AXIS1_DRIVER_MICROSTEPS        64 //    OFF, n. Microstep mode when tracking.                                        <-Often
#define AXIS1_DRIVER_MICROSTEPS_GOTO  OFF //    OFF, n. Microstep mode used during gotos.                                     Option
#define AXIS1_DRIVER_IHOLD            OFF //    OFF, n, (mA.) Current during standstill. OFF uses IRUN/2.0                    Option
#define AXIS1_DRIVER_IRUN             600 //    OFF, n, (mA.) Current during tracking, appropriate for stepper/driver/etc.    Option
#define AXIS1_DRIVER_IGOTO           1500 //    OFF, n, (mA.) Current during slews. OFF uses same as IRUN.                    Option
#define AXIS1_DRIVER_REVERSE           ON //    OFF, ON Reverses movement direction, or reverse wiring instead to correct.   <-Often
#define AXIS1_DRIVER_STATUS           OFF //    OFF, TMC_SPI, HIGH, or LOW.  Polling for driver status info/fault detection.  Option

#define AXIS1_LIMIT_UNDER_POLE        180 //    180, n. Where n=150..180 (degrees.) Max HA hour angle + or - for Eq modes.    Infreq
#define AXIS1_LIMIT_MAXAZM            360 //    360, n. Where n=180..360 (degrees.) Max Azimuth + or - for AltAzm mode only.  Infreq

// AXIS2 DEC/ALT -------------------------
#define AXIS2_STEPS_PER_DEGREE    25600.0 //  12800, n. Number of steps per degree:                                          <-Req'd
                                          //         n = (stepper_steps * micro_steps * overall_gear_reduction)/360.0

#define AXIS2_DRIVER_MODEL TMC5160_VQUIET //    OFF, (See above.) Stepper driver model.                                      <-Often
#define AXIS2_DRIVER_MICROSTEPS        64 //    OFF, n. Microstep mode when tracking.                                        <-Often
#define AXIS2_DRIVER_MICROSTEPS_GOTO  OFF //    OFF, n. Microstep mode used during gotos.                                     Option
#define AXIS2_DRIVER_IHOLD            OFF //    OFF, n, (mA.) Current during standstill. OFF uses IRUN/2.0                    Option
#define AXIS2_DRIVER_IRUN             600 //    OFF, n, (mA.) Current during tracking, appropriate for stepper/driver/etc.    Option
#define AXIS2_DRIVER_IGOTO           1500 //    OFF, n, (mA.) Current during slews. OFF uses same as IRUN.                    Option
#define AXIS2_DRIVER_POWER_DOWN       OFF //    OFF, ON Powers off 10sec after movement stops or 10min after last<=1x guide.  Option
#define AXIS2_DRIVER_REVERSE          OFF //    OFF, ON Reverses movement direction, or reverse wiring instead to correct.   <-Often
#define AXIS2_DRIVER_STATUS           OFF //    OFF, TMC_SPI, HIGH, or LOW.  Polling for driver status info/fault detection.  Option

#define AXIS2_LIMIT_MIN               -91 //    -91, n. Where n=-91..0 (degrees.) Minimum allowed declination.                Infreq
#define AXIS2_LIMIT_MAX                91 //     91, n. Where n=0..91 (degrees.) Maximum allowed declination.                 Infreq

// AXIS3 ROTATOR -------------------------
#define ROTATOR                       OFF //    OFF, ON to enable the rotator (or de-rotator for ALTAZM mounts.)              Option
#define AXIS3_STEPS_PER_DEGREE       64.0 //   64.0, n. Number of steps per degree for rotator/de-rotator.                    Adjust
                                          //         Alt/Az de-rotation: n = (num_circumference_pixels * 2)/360, minimum
#define AXIS3_STEP_RATE_MAX           8.0 //    8.0, n, (milli-sec.) Minimum ms/step depends on processor.                    Adjust

#define AXIS3_DRIVER_MODEL            OFF //    OFF, TMC2130, TMC5160. Leave OFF for all drivers models except these.         Option
#define AXIS3_DRIVER_MICROSTEPS       OFF //    OFF, n. Microstep mode when tracking.                   For TMC2130, TMC5160. Option
#define AXIS3_DRIVER_IHOLD            OFF //    OFF, n, (mA.) Current standstill. OFF uses IRUN/2.0.                  "       Option
#define AXIS3_DRIVER_IRUN             OFF //    OFF, n, (mA.) Current tracking, appropriate for stepper/driver/etc.   "       Option
#define AXIS3_DRIVER_POWER_DOWN       OFF //    OFF, ON Powers off the motor at stand-still.                                  Option
#define AXIS3_DRIVER_REVERSE          OFF //    OFF, ON Reverses movement direction, or reverse wiring instead to correct.    Option

#define AXIS3_LIMIT_MIN              -180 //   -180, n. Where n=-360..0 (degrees.) Minimum allowed rotator angle.             Infreq
#define AXIS3_LIMIT_MAX               180 //    180, n. Where n=0..360 (degrees.) Maximum allowed rotator angle.              Infreq

// AXIS4 FOCUSER 1 ----------------------
#define FOCUSER1                       ON //    OFF, ON to enable this focuser.                                               Option
#define AXIS4_STEPS_PER_MICRON      0.454 //    0.5, n. Steps per micro-meter. Figure this out by testing or other means.     Adjust
#define AXIS4_STEP_RATE_MAX           4.0 //    8.0, n, (milli-sec.) Min. ms/step depends on processor. In DC mode, PWM freq. Adjust

#define AXIS4_DRIVER_MODEL            OFF //    OFF, TMC2130, TMC5160. Leave OFF for all drivers models except these.         Option
#define AXIS4_DRIVER_MICROSTEPS       OFF //    OFF, n. Microstep mode when tracking.                   For TMC2130, TMC5160. Option
#define AXIS4_DRIVER_IHOLD            OFF //    OFF, n, (mA.) Current standstill. OFF uses IRUN/2.0.                  "       Option
#define AXIS4_DRIVER_IRUN             OFF //    OFF, n, (mA.) Current tracking, appropriate for stepper/driver/etc.   "       Option
#define AXIS4_DRIVER_POWER_DOWN        ON //    OFF, ON Powers off the motor at stand-still.                                  Option
#define AXIS4_DRIVER_REVERSE          OFF //    OFF, ON Reverses movement direction, or reverse wiring instead to correct.    Option
#define AXIS4_DRIVER_DC_MODE          OFF //    OFF, DRV8825 for pwm dc motor control on stepper driver outputs.              Option

#define AXIS4_LIMIT_MIN_RATE           10 //     10, n. Where n=1..1000 (um/s.) Minimum microns/second. In DC mode, min pwr.  Adjust
#define AXIS4_LIMIT_MIN                 0 //      0, n. Where n=0..500 (millimeters.) Minimum allowed position.               Adjust
#define AXIS4_LIMIT_MAX                50 //     50, n. Where n=0..500 (millimeters.) Maximum allowed position.               Adjust

// AXIS5 FOCUSER 2 ----------------------
#define FOCUSER2                      OFF //    OFF, ON to enable this focuser.                                               Option
#define AXIS5_STEPS_PER_MICRON        0.5 //    0.5, n. Steps per micro-meter. Figure this out by testing or other means.     Adjust
#define AXIS5_STEP_RATE_MAX           8.0 //    8.0, n, (milli-sec.) Min. ms/step depends on processor. In DC mode, PWM freq. Adjust

#define AXIS5_DRIVER_MODEL            OFF //    OFF, TMC2130, TMC5160. Leave OFF for all drivers models except these.         Option
#define AXIS5_DRIVER_MICROSTEPS       OFF //    OFF, n. Microstep mode when tracking.                   For TMC2130, TMC5160. Option
#define AXIS5_DRIVER_IHOLD            OFF //    OFF, n, (mA.) Current standstill. OFF uses IRUN/2.0.                  "       Option
#define AXIS5_DRIVER_IRUN             OFF //    OFF, n, (mA.) Current tracking, appropriate for stepper/driver/etc.   "       Option
#define AXIS5_DRIVER_POWER_DOWN       OFF //    OFF, ON Powers off the motor at stand-still.                                  Option
#define AXIS5_DRIVER_REVERSE          OFF //    OFF, ON Reverses movement direction, or reverse wiring instead to correct.    Option
#define AXIS5_DRIVER_DC_MODE          OFF //    OFF, DRV8825 for pwm dc motor control on stepper driver outputs.              Option

#define AXIS5_LIMIT_MIN_RATE           10 //     10, n. Where n=1..1000 (um/s.) Minimum microns/second. In DC mode, min pwr.  Adjust
#define AXIS5_LIMIT_MIN                 0 //      0, n. Where n=0..500 (millimeters.) Minimum allowed position.               Adjust
#define AXIS5_LIMIT_MAX                50 //     50, n. Where n=0..500 (millimeters.) Maximum allowed position.               Adjust

// THAT'S IT FOR USER CONFIGURATION!

// -------------------------------------------------------------------------------------------------------------------------
#define FileVersionConfig 3

uccoriginalblend55@...
 

Hi niko
Did you set "reverse DEC output after meridian flip"in PHD2 Brain?
Once you could calibration,Normally, you do not need to calibrate again.


Regards
Hirokazu

Niko Kivel
 

Hi Hirokazu

Thanks for the suggestion, I didn't use the option in PHD2, yet. I'll try new time I have CS.

Am I save to assume from the lack of replies that this is the intended behaviour?

best
Niko

uccoriginalblend55@...
 

No ploblem

regards
Hirokazu