#onstepx #sws #sws #onstepx


Debalme Stephane
 

Hi everybody
My Onstep : Maxpcb3.6 + teensy4.1 and run it with OnstepX.
I m using the ethernet addon (w5500 and teensy 3.2).
Everything works fine but I need to change the IP adress from 192.168.1.55 to 192.168.1.173
I changed the IP adress in the extended config.h from SWS but the IP still be 192.168.1.55 even after many atempt to flash the teensy.
I tried to change directly from the SWS, but it didn't work as well.
Any idea?
thanks
stéphane


Chad Gray
 

You did not mention using the NV Wipe.  Read the comment in the extended.config.h.  :)

image.png


On Wed, Sep 28, 2022 at 4:21 PM Debalme Stephane <debalme.stephane@...> wrote:
Hi everybody
My Onstep : Maxpcb3.6 + teensy4.1 and run it with OnstepX.
I m using the ethernet addon (w5500 and teensy 3.2).
Everything works fine but I need to change the IP adress from 192.168.1.55 to 192.168.1.173
I changed the IP adress in the extended config.h from SWS but the IP still be 192.168.1.55 even after many atempt to flash the teensy.
I tried to change directly from the SWS, but it didn't work as well.
Any idea?
thanks
stéphane


Debalme Stephane
 

Hi Chad,
You're right, I didn't mention it because I didn't do it.
I did it and it works....
thanks for your help.

stéphane


Chad Gray
 

I did the same thing a few months ago and Howard showed me the comment also.  

Chad 

On Thu, Sep 29, 2022, 5:19 PM Debalme Stephane <debalme.stephane@...> wrote:

Hi Chad,
You're right, I didn't mention it because I didn't do it.
I did it and it works....
thanks for your help.

stéphane


Debalme Stephane
 

Yes, never forget to read carefully all the instructions!!