First post, so I hope it is useful! I was able to order 1 and received it last week. 2 others are backordered with stock expected the end of Nov. RobotDyn - Black Pill STM32 Original STM32F103C8T6 ARM

Hi everyone, I am new to the hobby, and recently purchased my first scope. It is a used, but in new condition, Orion XT10 Plus dob. I really wanted to get a goto, but the price was way outside my budg

For those who face challenges putting the hardware together ... In this video, I show how a FYSETC S6 can be used in a minimal setup for OnStep. The TMC SPI drivers are the recommended ones (TMC2130 o

Good afternoon thanks for patience you all have shown me and my questions I am new at this electronic stuff I got he level shifters to lower the voltage from 5 to 3.3 I am using a HC-05 from the tx fr

Hello all. I have two super polaris mounts that I'm looking to make more useful. I have several questions though because this project is so versatile, but that means a LOT of options. I am torn betwee

Hello everyone, I'm new and looking to build my first setup. I'm adapting a dob with some 100:1 motors and a bunch of 3d printed parts. After digging around it looks like 32bit has a lot of advantages

Everything I ordered has come in (I think, I need to double check)! I need some other parts which are available locally and I can start the build. The plan for the electronics is to put them in the ri

My RA axis motor can only rotate in one direction

Hello everyone, I'm using MaxPCB v2 with Teensy3.6 and Wemos D1 mini pro, I've successfully compile Teensy and I can control it with usb connected to my computer, when I compile the wemos, arduino IDE

Hello everyone :) My first post here. I am owner of EQ5 which I am working on right now to implement Onstep - based on Fysetc S6 board. So far, steppers, gps, status led 1 and their configuration runs

Hi , I have just changed my onstep motherboard from a MKS GEN L to a FYSETC S6. I'm Using the latest master software .SHC and WiFi flashed as well. Wow what a difference! .I can now use a stopwatch to

Dear ESP32+CNC Users, I started new project with ESP32 + CVC v3 and have already uploaded firmware to Wemos D1 R32. but in https://onstep.groups.io/g/main/topic/77401791#26375, dtanon@.. used common p

Hello everybody, I was hoping for some advice on stepper motor resolution for a new project and thought I'd see what you all thought since you were so helpful with my OnStep project. I'm wanting to tr

Good evening I just finished up the Mks version of OnStep works great thanks for everyone's help ,but just can't seem to make the Bluetooth work it's a HC-05 I believe I have it flashed right, my phon

I'm afraid I have reached the end of a very long road and throwing in the towel with this project. After 2/12 months maybe its close, but I just don't have it in me to continue the wrestling match. If

Dear all, i have received the bluepill replacement board F303CC yesterday and just took a closer look: I cannot find a resistor labelled R5 on the underside of the board so I was wondering how I can e

A few months ago, I found a telescope stand with an equatorial mount at Value Village for $20. I ordered a 70mm refractor from Orion and soon added a stepper drive run on an Arduino Nano. Having had g

Hello, Now that my Onstep and my mount motorization are working correctly, I still have a disconnection problem after a few skysafari or Starry Night Pro ninutes, but the Onstep website does not disco

Hello all - Until a couple days ago, my Windows 10 laptop was able to connect to my Wemos R32 OnStep, though at times it was buggy and required a reboot. I recently re-flashed a later firmware, and th

Had first light with my build tonight. Only had a quick play to make sure the motors were going the correct way. Having never used Goto before this will save me so much time finding objects! Many than