Hi! Today I got may telescope camera and the seeing is great. Webserver and mechanics works fine, but I'm not able to control the teleskope with Stellarium. I use OnEsp 1.12i (OnStep 3.16q), Stellariu

Please help me to solve. I made a short video with description of the issue. https://youtu.be/P_wAmQfabu8 Thanks in advance.

Hi Guys, anyone here who would consider implementing the axis rate property in the ascom driver? It allows tracking comets, minor planets when they are relatively fast but even the HiRes photography o

In my Wemos 32 - CNC3 build I am using the Reticle output to drive a Mosfet to handle current to my Ground lamp. The circuit inverts the signal so that the + button DIMS the lamp and the - button BRIG

Hi guys, Im a total noob here, this is going to be my first time building something complex (and soldering it), so i wonder if someone can carry me trougth this journey to build my first go-to system,

Dear Onstep members, I want to present a part of my work snd ask for ideas and possibly feature improvements. Recently I made an observatory class mout from pilloe block bearings, shafts of 50mm diame

MiniPCB-V2 board with 3.16 OnStep Wemos D1 mini Pro with 2.62 Wi-Fi / Bluetooth TMC2130 drivers vref=2.5v, 100, 200, 200 ma set in conf.h All was running fine on bench, running for hours overnight no

My last post on this forum was a year ago and this project certainly took a long time, with intervening broken 3d printer, building a new one, excessive waiting for parts due to trial and error, and j

Hi finally my STM32 pcb is working and OnStep is up and running. After long waiting, there was also a good night to test with real starry sky - it worked. There are still a few open questions, but at

Hi there, In the first place: Thanks to the developers sharing for this great piece of software, although I couldnt get it running. I finished the hardware (cheap reflector on self built dobson mount)

Onstep 4.23.m.3 compiles but won't upload. Win 10 Home 1909. Lenovo G560e (usb2). Have tried with WeMos at default baud rate & with WeMos and COM3 both set at 115200. Have tried with & without CNC v3

Hello, I got my self deisgned board and am happy that my GEM Motors are running using 3.16...now I`m focusing on the focus motor but I have a problem getting my focus motor running... I see that the e

I built my MaxESp from a kit and I used tmc5160 v1.5 and Nema17 1.7A, 1.7Ohm, 2.85V for RA. Everything works fine on my Vixen Super polaris, but I was wondering: 1. what are the advantages and disadva

Hello, i have finished the build based on Martins design. I use TMC2130 drivers.. SPI jumpers on the FYSETC are all installed (4 pcs for each motor output). Anyhow - after connecting the steppers i tr

I have two SHC units, both running ESP32, and kits were from my good friend George Cushing. Today I uploaded SHC firmware using the latest "Master" version into one of my ESP32 based SHC. I connected

Hello Group, I have been able to flash and confirm OnStep is running on a FYSETC S6 board with WiFi and plugged in a Neo-7m GPS module (which lights up a steady red). Upon connecting to the web site a

Hello; I have flash another time board, but onstep didnt start, no wifi, no motor activity..... i have recheck all parameter; wire, board and nothing seems to be strange..... Do you have a idea?? USB

I started a week ago with the project of assembling my onstep with a stm32 blue pill. Everything went really good so far. Flashing stm, configuring wifi, wiring Everything in a protoboard, powering up

I want to enable serial b for a gps. I know there is two resisters and 2 caps that need to be removed. I have read several posts about it but none of them go into more detail then just mentioning it.

Hello all, First, thank you all for the work you have put into this project. I have completed my build of the MaxESP3 (SW v4.x) for my NEQ5 mount, but I am a bit lost about how to get started. The lea