On Tue, Apr 20, 2021 at 11:35 AM, Howard Dutton wrote: Not really, it seems to be a sensors problem, perhaps down in the libraries.Or perhaps corrupt signaling on the I2C bus locks up the (Arduino)

On Tue, Apr 20, 2021 at 11:08 AM, Laurent HOUSSAYE wrote: 7. as 6. plus Weather charts ON : No change in the unsatbility status and charts are all empty. I will try to reload the Chart.js file

On Tue, Apr 20, 2021 at 11:08 AM, Laurent HOUSSAYE wrote: Are there any debugging codes that could be useful for me to improve my investigation ?Not really, it seems to be a sensors problem, perhaps

Hello everybody Thanks Howard for your efforts: I downloaded the latest OCS version 2.33, and set it up for my observatory with my basic configuration in config.h with no Weather function : OK as 1.

Thank you for the update. I'm using python for distant request on OCS with these commands and it's very nice. You did a very great job

I patched those issues (version 2.33 now.)

On Sun, Apr 18, 2021 at 02:52 PM, koal01 wrote: I changed these lines in command.ino this way to get the temperature value through a ":Ga#" request and it is working now #if WEATHER_TEMPERATURE == ON

I just uploaded/tested the latest version (github) to take care of Koal01's issue, no surprise it came right up without issue. Note that 2.31 and 2.32 are for our purposes identical and I did testing

I changed these lines in command.ino this way to get the temperature value through a ":Ga#" request and it is working now #if WEATHER_TEMPERATURE == ON && WEATHER == ON // :G1# Get outside

On Wed, Apr 14, 2021 at 01:11 PM, koal01 wrote: I'm using the Adafruit si7021 and the weather is displaid on the weather panel but impossible through the monitor Same function called for the weather

Sorry Howard, I should not have gone so quick, I have to amend the picture... Soon after having sent this last message, I realized that the Web page displayed on my screen was in fact frozen... No

Last update for today @ 16:30 h UT: Good point for me : I think I have found the cause of the instabilities and cured them. Bad point for you Howard : It seems to be the latest version of OCS

Sorry I was wrong in my last post : the Basic configuration that is OK and perfectly stable is with OCS version 2.1c. I did'nt update it because it is operating perfectly.

Update of 18th of April 2021: Starting point : OCS version 2.31. Basic configuration : Roof control function + Power relays control function. Operates perfectly in particular the relays operate

Hi Howard Is it possible for you to check why i can't get the temperature through the command :G1# I'm using the Adafruit si7021 and the weather is displaid on the weather panel but impossible through

Some update after further testing : I tried to put SQM OFF in config.h : no success : frequent reboots whatever the status of the 2 power relays (On or Off). No visible sign of these reboots when the

Good morning Howard the problem is that if I turn off the Watchdog the OCS web page fails and freezes... I had no relay problem at all with my previous configuration and the same relay wiring

All commands to get weather information work fine except temperature...

That's exactly what i need, thanks Howard ! I'm going to test these commands and let you know In one post you talked about a project of builiging an OCS on an ESP32, is it for a distant future ? :);

The OCS doesn't do XML :) What it does have is an LX200 like protocol with :xxxx# framed commands and # terminated responses. You can see the available commands in Command.ino, they include commands