Hi Howard, I’m building an Allsky just next to OCS, from time to time the camera under the dome will need some heating when humidity and temperature reach a certain level. An idea has crossed my mind

Running full OCS on a ESP32 would be terrific, this MCU is cheap and fast. Would you intend to build a PCB based on the ESP32, the 38 pin version i suppose, with selected features (as the Mini in your

Hi Howard, In the future is there any wifi integration in your roadmap on OCS ? I'm building a second OCS wich would be a nomad version mainly to get the weather webpage. I was wondering if using few

Hi, I changed the sensor box making a new one with RJ45 female plugs firmly connected and everything is ok now. I would say it is a 2.0 box ! it has been running for 2 days now with temp, sqm, pressur

I'm testing OCS on a bench with debug_weather ON without any sensor connected, only a mega. I have no error in compiling but two sensors are failing while the respective libraries seem correctly insta

Thanks for your answer Howard. The weather.ino is exactly the same as your observatory example. What is attached ? IR MLX, SQM 2591, BMP180, temp and humidity sensor S071... By the way I replaced the

Hi, I'm not progressing on that weather panel problem since i tried to add physically an MLX sensor to OCS. I can't make work any sensor. I launched a debub weather monitor but it is not very verbose

Thanks for your answers I think both tests have already been done. During several months OCS was working with IR code and activated but no IR component was physically plugged. In this case OCS works n

Hello OCS users ! After months with OCS very stable i decided to add the MLX90614 component yesterday. At the beginning everything was ok on the website showing values correctly but a few hours later

Oups i did not see Howard's answer ,sorry !

Hi had already noted something wrong with the DST time parameter a few months ago and forgot to post the issue. Howard will certainly take a look at it when avalaible. I red he was busy around onstep

Very nice icon. Is it responsive on smartphone ?

Personally I’m on the 2.3 i version with an uptime around 20000 minutes, around 14 days without any reboot and 2 sensors running. My next step will he will be to connect all sensors and see what occur

Fernando did you try to reboot your internet box at home to see if it could solve your timeout issue.

or try a new ethernet shield and /or sd card ?

I found an external source that was perturbating OCS, i stopped it and i have no more timeouts in OCS. I was actually using a netgear wifi extender in my network, i was not using it for OCS but for ot

So my 220 V is rubbish. Actually it is coming from my 12v batteries storing energy from solar panels, The current is converted from a 12 v - 220 v converter. Here is the model Convertisseur 375VA 12V

I’ve just tested with no 220v on relay6 and OCS is working fine. I switched on and off the relay ten times without any problem. When the 220v is connected i can only do a switch on and off one time an

As i'm speaking the 220 v relay is connected on relay 5 and OCS is working fine. The website and the ethernet shield are disturbed when i switch the relay 5 on and off on the webpage

Everything is ok when the 220V is disconnected or connected but not used. The webserver is very responsive and charts as well. If if switch on the 220 V relay everything is still ok but when i switch