Bummer, I was wondering about that. Thanks Nino

Howard, are you using the Wind Sensor Rev.? Just wondering how accurate it would be during cold or sub zero temps. Did not seen any temp operating temperature ranges in data sheet. I believe it works

Thanks Howard, it worked perfect. Nino

Did you get your rain sensor code set up?

24 hr and last 48 dont show the gaps. I can work with that. will let it run again on the bench before I run it back to the observatory. Nino

Here is what my weather panel shows for 2.3g and 2.3h clicking "recent" tab, I disabled most of my sensors except for my outside bme280 and rain gauge. The image of left is firefox and one on right is

Just an update, my weather chart is back to normal, not skipping like before, considering the corrupt data.

Koal01, I am not using the reset wire, but I can try it on my set up. How do you have that jumper wire set up. from what pins do they need to be plugged in. Thanks nino

Charts loaded but it is showing an alternating gap for data, first is 30 seconds, then it is a 60 seconds between readings. I have attached a word file showing my results which ended with a corrupted

I just updated to 2.3g, going to bench test it. No Watchdog. Nino

I checked my system this morning seems to be working fine on the front panel, I was using "2.3f". But I checked the weather panel and there was no data showing on either of the tabs. So I uploaded the

Here is data with Watchdog set to OFF

I am using the latest, but here is my serial port data with debugging set. nino

i just updated to 2.3f, with watchdog on. Going to let it run NIno

I had it ON when I was bench testing and putting it all together. I did have a lot of reboots but I blamed that on hooking it up to my usb port on the pc.(Brownout detector was triggered). I did not t

watchdog OFF

Yes I have been using charts since the first install. my set up is simple, I dont have the ac/dc monitoring set up like yours. I do plan on monitoring just the DC part, to make sure my battery is full

Hi Howard, I removed my bme and switched it over to DHT11 can you help me with the coding on this to get the inside temp and humidity? Did not make sense to waste the bme for just these two readings.

koal01 I dont know why you are having so many issues with reboots in your system, I have had mine set up since I believe February (was testing subzero temps) with no issues. I just removed it from obs

lot of people are using it to build temperature sensing devices for covid. price went sky high.