yep the ACS712_V component gives the current used by all the stuff used in OCS, i need to monitor current since my first power supply are solar pannels, very useful, i really like it. See the screensh

Waouh i wish i had this nice wiki at the beginning struggling with OCS 2 ('im still on this version) and harassing you with tons of questions. Very good idea to introduce it with OCS4 for the growing

Sorry i didn't see your quesion until now Here are my sensors : Temperature -> SFE_BMP180 Barometric Pressure1012 mb -> SFE_BMP180 Relative Humidity -> Adafruit_Si7021 Wind Speed -> Modern Devices win

Hi Howard So we are now at the version 4 Good job ! My ocs 2 is quite old now LOL but is still working nicely ! Last year i bought some components to build OCS3 but i'm going to consider this new rele

Hi Actually I have a doubt concerning the RevP. I’ll check the wiring, I suspect a cable problem, I’ll check that tomorrow. The other 2 sensors not working -the bmp180 : I’m using the bmp180 library i

Nice to see the new OCS pcb soldered ! Good job ! I look forward to knowing about the results when you install it. Thanks for sharing Howard

OK I decided to flash the mega with my usb1 port instead of the usb 3 one and the mega has recovered, interesting ! The mega is now stable and i can reach the webpage All panels are working : status p

192.168.4.50 is my computer address, i'm pinging 4.10 (OCS board)as you can see in the screeshot

Hi, I'm testing OCS on the Mega, i've desactivated all sensors, power panel and light panel. The debug mode is on "VERBOSE" status but no clear information. As we can see in the screenshot no ping in

Maybe we can focus on the mega for a week and then test the compilation on The Teensy board I know it's a job to debug several boards at a time and especially on a very new board like the Teensy 4.1 T

Talking about the Teensy 4.1 the compilation is now ok in the 3.b version, a light error concerning the TSL2591 (not with the Mega) but non blocking I'll test this version tomorrow on the mega 2560 an

I’ve also ordered a Teensy 4.1 with headers, less expensive than the 3.6 and quite interesting

Thank you for patching and checkling the weather sensor code.

Concerning the bmp180 I think the library is properly installed, BTW the sensor works fine in ocs2, I was meaning a compatibility with Ocs3 as there is no parameter for this specific sensor in the con

Testing the latest version on the Teensy 4.1 i can read this error in the compilation around the watchdog although it is not activated in the config C:\Users\me\AppData\Local\Temp\arduino_build_382019

I did a short test of OCS 3.a on the mega 2560 this afternoon. As i was on the usb supply I could display the webpage but i had just two weathers sensors working (temp and humidity), other sensors wer

Magical, nearly everything solved. I didn't know i could copy all my Power panel from OCS 2 and paste it to OCS3, nice ! The sensors errors have also disappeared, for the bmp280 after a google researc

Hi Fernando ocs 3 is in the master branch

Feedback : The wind sensor RevP is not operational I also tried to activate ETHERNET_RESET_PIN and CONNECTION_CHECK_HOURS parameters in the extended config.h and the IDE display errors When these opti

Howard, i was using in OCS 2 the power panel in config.h for specific use and i really did like as they relay were named as Device 1, 2, 3 etc.. My shelter is not a standard In OCS3, the power panel h